An Amiga TestProgram for all Amigas. Remove hardware from the parallelport
when doing tests on this port and real interrupt testing. Don`t use
Amitestkit or DiagROM testplugs! Remove parallelport testplug when done
using the program.
Main features include:
AGA, ECS and OCS screen testing
Joystick and Mouse testing
CD32 joypad testing (insert first)
Vampire joypad testing (buggy)
Keyboard testing (CDTV extra keys)
MMU testing (write protect test(040/060) and registers)
Real Interrupt testing
Interrupt Request testing
Chip ID readout
Akiko CD32 testing (Force CD32 in configscreen or open CD32 Screen to get more
testing in other tests, (interrupt and "CIA/"Akiko-TOD switching PAL/NTSC)
CD32 NVRAM testing (Not for ROM version will use nonvolatile.library)
CDTV NVRAM testing (experimental)
CDTV Card testing (experimental)
AutoConfig testing not working on real hardware? and only on ROM
Controlling one Amiga with another one through a Nullmodem or a selfmade
*CD32 will use joypad control on boot (hold lmb for 6 sec to use mouse)
*For master start terminal other Amiga will be slave automatic on mainscreen
TestPackage include EPROM file single socket 68000(+)
TestPackage include EPROM files double sockets 68020(+)
TestPackage include EPROM file single socket 68020(+) CD32
TestPackage include EPROM files doublesocket A1000 (experimental!)
TestPackage include ROM files for emulators (524kb use 020+ and 64kb=A1000!)
TestPackage include bootable ISO file (can be an older version)
TestPackage include QuickDisk (diskdrive tests only)
(BUG! versions 3.6b to 4.1b don`t work on an A4000 with 030!)
(BUG! version 3.6b also dont work on an A4000 with other CPUs!)
(ROM13.2 to 18 same problem!!!)
Use right combination of VATestprogram, ROM version and .dat file, or it may
give problems. (terminal mode hanging/wrong symbols/not working, bad loading of
.dat file). Older versions are included in the package so you can work with an
older ROM version of the program.
At diskdrive screen, Wait on Word SYNC from disk at writing option added
At diskdrive screen, program can try to find WordSync from disk when all SYNC
is disabled. The estimated Sync Number keeps jumping and sometimes get found
Going through menus with a mouse or joystick it will use a buttoncounter insted
of a mouse memorymap, which give less problems when program is in bad memory
Program will do a fast check on chipmem used for program and report if it is
failing, it will give an error message on the mainscreen, some tests make use
of the chipmem and may fail if the chipmem is not oke
CIA with "show counting" off will also not show counting for the combined
More polygons added for line&fill test
Some work on the guide of program
Adjust color screen has big color bars
!You may damage your monitor when set wrong, because you can send all kinds of
frequency signals that the monitor don`t like! DisplayPlus screen is locked
Displaysetting will start with the older settings that was used before for the
On Mainscreen with program unlocked you can hold RMB and press D to goto the
On The displaymenuscreen you can press D to show the monitor screentest
DisplaySettings All Alice/Agnus registers added for a none standard Amiga
Display, you can also select a resolution in BPLCON0 register
Older Kickstart will look for files in VAT:, name of disk is changed to VAT:
this way you can install the program any where you want and the files for
the program can be found in any drawer when using an assign for VAT:
Reading and copy disk will use standard error codes
1 Less Sectors on read 2 No SYNC 3 No sync for next sector 6 read checksum
error 8 Verify Error
DiskError codes will use a red color
Keyboard fix not going to left diskdrivescreen menu buttons
Raw Clear disk, will copy $AAAA data for 32Kbytes after waitindex for each
Raw Copydisk, can copy disks but not all disks will copy oke
Faster diskhead stepping, for slower stepping set timing to VBL
WriteProtect warning but will continue
!Some diskdrives need faster stepping before you notice the drive is not
!Copy disk to same drive need 1.8mb of free memory
Some work on guide of program
ISO file updated to latest diskversion and ROM
Auto selecting Gayle or A4000 IDE fix on startup IDE/SCSI screen
ROM Update 29.4
-Adjust color screen upgrades from diskversion
-IDE reading sectors etc upgrades from diskversion
512bytes Hexview of sector/block harddisk, no need for; device to be formated
or OS finding of device and can reach 128gb of space on any kickstart
Option to read more then 512bytes per block
Navigation with arrow keys up down for reading multible blocks of 512. Set
readsize higher. You can test the harddisk buffer if it is larger then
Navigation per sector with arrow keys left right
Press S for putting sector number
Press C for cylinder
Press H for head
Retry or no retry harddisk sectorreading
Read last readout from buffer harddisk and view in hex
DriveDiagnostic command sending to drive can indicate a problem but buggy,
diagnostic comes from the drive it self!
Listing of IDE registers and a Read write test moved to other screen
More Errors readout of IDE devices and output text at the bottom
Geometry can be used to lock sector/heads/cylinders that are not present, it
needs you to read first the ID from the drive and incorrect ID readout will
MMU test will list MMU registers both for MMU 030 and 040/060
Last line draw test will loop
HAM8screen with sprites bug removed
ROM Update 29.2
-MMU register listing under MMUtest
Search option ASCII added hexviewer, press shift S for input and s to search
!Search only do max of 1mb, ending in some memory that don`t exist can give
a bus exception. ASCII search can do 32 characters and is case sensitive
Better Marking of found search text Hexviewer
Bug removed missalignmentmemory foundhexviewer
Address input hexviewer press a
CheckerPattern screen added with RMB to switch to overscan, usefull for LCD
Left and right mousebutton can also scroll text in terminalscreen
Adjust Color screen can spread, copy/exchange colors and set to a fix palette
Extra linedraw test, will drawlines from middle to edge of screen going around
More Efficient Palette loading in program
AudioBeep when switching audio genlock
!Use new vatestprogram.dat file or else data will load wrong
ROM Update 29.1
-Larger ROM versions will put video port pinout on videoscreen
SCSI/IDE screen possible to list devices in an old way so it also works on
ROM1.1 and up, Listing Devicename/DeviceDriver/unit/volume/filesystemmarker
(HDToolbox may put wrong marker)/Maxtransfer/Bootpri/Mount
AudioScreen will show a more full samplewave for longer samples
Bug fixing, readalltracks bug removed, another fix diskdrive readsize changing
Diskdrive selecting for readalltracks is linked again on 1e menu diskdrive use
ROM Update 29
-ROM will check for odd data at even address fault and other way around, done
on address $100/$102 and $101/$103.
-Can chooise between two modules and for the larger ROM versions 3 modules
-Turning off the mouse 'm key' will disable the use of a clickbuttonmap in
memory, so most of working memory is not needed in this case, only the memory
for the stack and variables are vital, you can use a joystick or keyboard to
-Module added for larger ROM versions from Aquafresh of Mellow
Playing a sample of module will show wave drawing of sample
Pause module track option added
32kb diskblock reading menu bug removed
Bug fixing and enhancing program
A alot faster memory test when avoid interrupts is selected
Semi 64bit mulu and div instruction test added for CPU 030+
ROM Update 28.8
-Update most features of latest disk version except for diskdrive testing
-32kb diskdrive reading menu bug removed and 12kb option added
-Readalltracks bug fix
CDTV Screen added
CDTV int2 bug removed
CDTV force chipset added
CDTV detection by none AGA and debox.library present check
NOCDTV cli and configfile option added
CDTV real interrupt INT2 test added
NVRAM R/W Test (will save and restore old data and do R/W testing!)
NVRAM Write (will save a 32bits number at end of memory)
NVRAM Read (will check for the number that the writetest had placed before)
Card R/W Test
Card Read Test (will read all data that write put before)
Card Write Test (will write data for readtest)
SetSize Read and Write Card
Keyboard screen will show extra keys for CDTV (play stop etc)
ROM address set quick button in ROMscreen
Module Play Speed adjustment buttons
Module Play Song position control
Keyboard input will clear text but restore text when pressing enter rightaway
Keyboard bug removed A500 DMAspeed
Readtracks no wait on diskblocks (buggy with real disksdrives)
!CDTV Tests only tested in emulation, CDTV tests may not work on real hardware!
Audioscreen can also play any samples of test module
Blitter Speed test with DMA activity
HHPOS Register added for registertest
Some work on Guide
Clearingscreen removed realtime addressline tests
Cursor added for all keyboardinput
BackSpace can remove keyboardinput
Hires screenmode test noneAGA bug fix
Keyboard can`t reach all buttons fixing
Better SuperHires test for AGA
Extended scrolling screen for AGA Amiga test on a superhires screen
Extended scroller can switch to hires with RMB
SR supervisor bit test added (not an accurate test)
Better Sprite to SpriteCollisionTest. Will now test each sprite to sprite bit
separate and not only test all set and all cleared which is also included with
this new test. Test will run twice, first even and then odd sprites.
Color adjustscreen will show color number
Color adjustscreen halfbrite bug removed none AGA Amigas
Color adjustscreen will also show color value in bits
Verify for diskcopy option
12kb readsize added and program will preset this
Highdensity will set the readsize higher when set on 12kb to 24kb
Diskdrive screen changes and menu added
Setting Source and destination diskdrive for copydisk
Set write size of a track for diskcopy
HD/DD switch will reset trackwritesize
Auto Frequency Test on audio waves under audioscreen
Diskdrivescreen on start will reset to DD Amiga disk
!Diskcopy not working on real diskdrives, so it is disabled!
DMA speedtest, will loop CPU instructions to chipmem for 1 seconds and will
show the CPU mips speed while switching DMA channels with DMA load.
You can test how much CPU to chipmem speed is lost when there is other DMA
Pressing H for hires mode DMA speedtest
Pressing L for lowres mode DMA speedtest
Pressing S for superhires mode DMA speedtest
DiskDriveTests can work with Highdensity disks but Paula can not always read
enough data from disk for one Track, so it will not always read all sectors in
DiskReadSpeed test, will test how many raw readblocks can be read from a disk
WaitForIndex will make the readdiskdata tests wait for a rotation of the
diskmotor. Distance of found data in memorydump diskdrive should be more
RGB manual color adjustmentscreen with a mouseslider, RMB will show empty screen
with the color of color zero, also a RGB hexvalue.
Halfbrite test will switch to Hires with right button on AGA Amiga
Diskdrive screen updates
ESC key can exit keyboardscreen
Extra VBR-table copy to chipmem before CIA switching overlay
Monitor function for AddressLine tests, will show data bits on lines. Can also
be used for a single address. Will show first address and bits set.
First addresslines that have no purpose to test on more data bits are removed
When putting zero addresslines, in monitor test it will not correct any
addresses from 16bits only 8bits alignment, it will also not block any
Poking in memory possible when pressing P in the addresstest it self, input
data to poke and then address, when enter press rightaway it will use the
base address from the address test it self.
Adding addresses to addresstest while running pressing A, you can fill in
an address and the bussize.
(Q)uick button next to monitor in addressscreen to start with only one address
NOCACHE cli command option added
CACHE cli command option added
NOPAD cli command to start CD32 mode with a mouse and not a joypad
NOCD32 cli command to not check for CD32. Unfortunately it gives a bus
exception when ussing the Akiko ID register readout on an A4000. To be sure
you can disable the CD32 check if you amigas hangs on booting of the program.
Program now also have a config file. You can type the words from the cli
commands in the text file. ; in front of the words dont work.
Protection on head move loop when no track zero sensor works!
Holding ESC 5 seconds on keyboardscreen will jump to mainscreen.
CD32 bug fix for hanging on CIA testscreen
Keyboard transmit error bug removed entering keyboardscreen with keyboard
EatFastmem Program will now load in chipmem so it can eat more.
VATQuickDisk Some bugs removed
Importand bug removed. Early exceptions caused a crash of program because no
pointers where ready at the beginning of the chipmem after rom overlay
Exception and early interrupt error colors longer on screen
When parmode is set on it will skip some of them customchipregisters such as
the color code to color 0 with an exception.
After parmode check and parmode was not set and you have an early exception it
will not output on the parport to avoid cia activity.
Moving some CIA settings to later in the program so there is more chance it can
Customchip registerstest can be used over terminalmode but is slow
Less restrictions on diskdrive use in lock mode
Diskdrive screen button changes
Diskswaptest with better protection of stepping to highertrack on last track
Repeat option when reading all tracks. Disks with errors will keep trying,
this can remove abit of errors on disks, number 99 will keep trying for
Head Move Loop; will just send the heads up and down. It may remove some
dust inside a disk Max is 50 times.
Terminalscreen scrolling removed to gain speed
Terminalscreen will now clear a line after printing, needed when looping back
text with to much text on the screen(buffer).
Terminalscreen can now also show only hex numbers, configscreen have a switch
Terminal wil use alot more memory that is there anyways for the text on the
screen. More lines before it will loop back.
Program can use CLI arguments to not use exceptions and unlock the program
right away. These are AVOIDCHIP, UNLOCK and NOEXCEPTIONS you type behind the
cli command VATestprogram. These only work from ROM 2.04 and up. (use /?)
NOEXCEPTIONS will skip exception changes and storing and tests with exceptions!
Some CPUboards and running software may not like the use of some exceptions.
AVOIDCHIP will move the buttonscreen to fastmem if any, some tests will
use the buttonscreen memory also.
Harddisk readout and C2P test moved to buttonscreen memory.
Program will verify chipmem that is reserved for program and with a fault
will move the buttonscreen to fastmem if any.
More Easy to remove lockmode in aboutscreen
Small program added in C directory for removing most fastmem, the testprogram
can then run from chipmem only.
Made alot smaller and can boot from disk. Is 9 diskblocks large.
Program placed in other memory sometimes show extra long click button bug
Unlocking in About screen more easy
!Extra tests added when no memory can be used ROM version!
-INT2 INT3 INT6 line high Text
-Longer waiting to cancel VBL waiting CIA timer tests
-Horizontal position counter test (VHPOSR)
-Color Screen Test with bitplane set open. Memory for screen data will run
-CPU writing to audio and bitplane data direct screen test
-Text added when pulsing in loop on chipmem bus at Address $400
CustomChip registers test can now also mark bits red when holding a different
number then expected (use RMB).
CustomChip registers test should now also work over terminalscreen
Pre set Address test chipmem A1200 rev1 added
Pre set Address test chipmem A2000 rev6 added
Auto DatalineText added for some of the Preset Addresstests (32bits&16bits
tests that test by each byte)
DiskdriveTests only program on adf for faster booting from disk and more
chance it can load from disk.
Less use of customchip registers on roomboot to avoid problems when custom
chip lines are bad.
Pre CPU exception errors output a letter on serial and parallelport
Pre IRQ activation will output a letter on serial and parallelport
BPLPRI test bug removed
Hanging on Serial register int stuck bug removed
!Letter codes will wait abit and output a return also on serial and also
parallel if it is set on.
!Rom files added for A1000 64kb, will use bootstrapROM startaddress, these ROMs
have not been tested on a real A1000 and are experimental! Interrupts
!65kb ROM file added for A1000 emulation
RealTime mode added for Hex viewer
Parallelcable can be used in terminalmode and works between two Amigas
Parallel communication turn on with keysholding at menus p, a, r and alt
Readonly mode for addressline testing (different behavour then Read/write and
can be used for ROM addresses, can show when oke but not faulty will use
a "same" message
Keyboardscreen will also show binaire reading keyboard keys
Keyboard special codes will show a text comment (keyboardreset, buffer full,
transmission error, keyboard selftest error)
IRQ monitor test will not block VBL anymore for int counting level 3
CustomChipRegisters Monitor under registers and will mark bits that dont change
for checking stuck bits. RMB will try to activate bits for testing and change
mode also from each chip to each register for marking bits not stuck.
Can scroll up and down with keyboard in terminalscreen boot info and errors
-Hold fire button on 2e joymouseport on boot and let go when screen will show
bluepurple, if parallelport all bits are high then it will enter parallelmode
-Hold p a r and shift keys on keyboard for parmode on menu
-Terminal can do parallelmode
-Can output boot errors and info when on parallelcable mode
-Program can output displaytext to terminal over parallelcable
-IRQ monitor test will not block VBL anymore for int counting level 3
Configscreen more options for mouse/joystick control
Terminalscreen can receive text from ROM version
Terminalscreen can list text that is received and will scroll down when needed
Terminal receiving screen will loop back when receiving more then 145 lines
Less chance of bogus connection between terminal and other computer
!Older VATestprogram and ROM version will not work anymore with new version
-Mouse/joystick control update
-Terminal mode update
-Less chance of problems on wrong connecting
-ROM file will not use small colors codes any more
-PC with a COMport ASCI program can receive text output of an Amiga with
VATestprogram ROMs, set to 115200 baud and will only give boot info and errors
-ROM that have no working memory will output some tests on the serialport
with text (CIA timers/ CIA register test, some customchip register tests and
output interrupt requestregister (you can check for interrupt activity)
-ROM 3 boot stages will output S1, S2, S3
-If other memory is used for program, it will output this on the serial
-Flashing screen will skip when a nullmodem is connected and terminalmode is
open on the other computer.
ISOFile updated to latest version
Joystick can also be used to selectmenus
Swap mouse and joystick control with letter J and M
About 3 seconds holding fire button on mainscreen will swap mouse joystick
Right mouse button also works on second port
CD32 detection will put joystick as control
Right mouse button on second port being stuck will show message on startup
ISO file added for Amiga CDdrives, bootable and can be used for CDTV&CD32
CD32 NVRAM testing, read/write/(data r/w check)/ delete save file
!Makes use of the nonvolatile.library, CD32 should be pre detected
!Unlock mode for more testing
*ROM Update 24
-Set of Sprites moving to other memory with bad memory
-boot errors review
-green flashing can be skipped with a left mouse click
-speed change green flashing
-extra Sprites other then mouse pointer can be switched off
-if memory moved it will give a message
-better use of program with copperlist off
-interrupts avoided when VBR can`t move which will mostly fail CPU interrupts.
!Testing on real hardware with heavy memory bus problems, see ROMreadmem!
Hexview search crash bug removed 68000 CPUs
PCMCIA Warning message
*ROM Update 23
Stackpointer, copperlist, Variables, VBR(020+), Screen and screenbutton map
can be moved around when having bad chipmem. This is done automaticly.
-Some updates from disk version
-At configscreen you can change memory for variables, screen, screenmap
and copperlist of program
-Program can run without a copperlist but with only one bitplane
-Copperlist can be switched on/off in the configscreen
-New bugs removed from previouse version, mostly text bugs
-Modules and HAM pictures will load directly from the ROM when needed in
chipmemory for the screen
-Small audio Samples will move with the copperlist in chipmem when having bad
chipmem on the first 262kb of the chipmem
!In short a very large amount of changes have been made so the program can run
from other memory when finding bad memory on first 262kb of chipmem, this have
only been tested in emulation!
!Moving the memory worked in emulation to higher-chipmem/slowmem/cpu board
fastmem/A4000 motherboard memory but not to autoconfig memory, but memory in
24bit range (A1200-020 030ec) will not work if it is autoconfig!
!ROMProgram can have new bugs because alot of changes have been made to it!
!Testprogram can flash green alot on romboot with bad chipmem! You need alot
of patients, the flashing correspont with a databus bit fault!
PC text under CPUscreen, address of running CPU instructions
PCMCIA compactflash readout ID of IDE device
PCMCIA bits and address mode detection on readout ID
PCMCIA Some of the Status bits on screen
PCMCIA CC disable option
PCMCIA Digital Audio switch
PCMCIA speed change button (unlock first)
Work on guide
First two bytes of ROM address in ROMscreen
Terminalscreen can produce menthol blue color code
*ROM Update 22.6 (CPU instructions from ROM)
-Menthol Blue Error code added for a bad VHPosr readout (no running of Vsync)
-With bad Chipmem VBR moving now also to CPU board memory or mainboard fastmem
68000 and 68010 excluded
-Bug fix crash after greenscreen for OCS Amigas without any working memory
-PCMCIA tests added
-Bug Addressline text no addresslinenumbers fix
Better NTSC/PAL detection on boot with other powersupply tick
Nicer Screen swapping HAM6 screen and testscreen
Small fixes for better looking testscreen
Fix for BOB moving on NTSC clipping bug
Stackpointer number under CPU screen
VBRBase number under CPU screen
29280 bytes less memory use, abit more data will load in chip insted of fastmem
CIA timer bug removed exit after disk readtracks
Interrupt no need of CPU interrupt only on Paula for Diskblock done disktests
*Rom Update 22
-Update most of latest VATestprogram
-Program still running from chipmem
*ROM Update 22.3
-Update most of latest VATestprogram
-ROM Testprogram will run now all CPU instructions directly from the ROM not
-Stackpointer moving in memory to higher chipmem or in slowmem when chip memory
for stackpointer is faulty
-Moving of vector table for AGA Amigas and 32 address line CPUs if stackpointer
memory fails and will use one directly from the ROM chip!
-Smaller ROM will also have CD32 tests, AGA sprites and joypad test vampire
!ROMupgade in short, alot more chance the program can run with chipmem problems
!for now the ROM can take a long time to boot after a green screen
-LowerAmount of memory use, gives more space in ROM
Unstable program bug removed after Copperlist2 test en CIA registers test
Extra colors added testscreen
CIA screen changes text positions
CIA Help text for correct timer values when pressing RMB
Avoid interrupts switch in config will also make the CIA tests not use ints,
this can prevent hanging when CIA Interrupts are stuck high and dont work
Control CIA registers can be tested
CD32 detection by C2P pointer in graphics.library
Bug fix C2P test fail after use of some functions with 2MB chip only CD32
Large Sprite added for AGA Amigas
Abit nicer Copperlist2 test
Better odd data test
Better Chipset switching
Will also mark oke when CIA A TOD timer have a different Tick under CIAtests
.dat file can also be loaded in other memory then chipmem
.dat file will only load partialy for none AGA Amigas
More FPU exceptions will be tested from FPCR register
Test for some of the CIA Registers, keyboard CIA register test moved
Other shift works also for a hex search
Hexviewer will mark text better for search function
Hexviewer works now with a nullmodem connection
Hexviewer mouse can scroll abit
New Sprite added when vatestprogram.dat file is loaded
Bug removing keyboard control and better going through menus/buttons
Simple Copperlist2 pointer test
CPU forcing under config screen
Begin work PCMCIA port tests
Possible to unlock mode with keyboard in aboutscreen
Terminalscreen exit both left and right button needed
Right mouse works in TerminalScreen with a Null modem connection
Program can exit terminalmode and reconnect easly
Avoid hanging in terminalmode slave Amiga and will exit connection
-Terminal communication with rightmousebutton possible.
Mousemoving no need of JoyTestregister any more, may fix vampirestandalone bug
Keyboard can disable and enable mouse moving with M key.
Terminal mode can read color codes and receive bad memory bus bits and
Very simple extra 020(+) instructions test
Faster drawing of buttons
*ROM Update 21
-Outputting error color codes serialport
-Rearrange ROM boot process
-Smarter overlay test, will loop till working
-Memory Test will show a darker green if a higher amount of memory is faulty
-Output on serial (with checksum) bad bits memory bus.
-Higher amount of chipmem bus bits failing will also output bad bits on
address $4000 only
-AddressTest will output on serial on ROM boot for first 262kb when failing,
will also output higher addresslines
Bob Testing Channel A mask words
Bob Testing Channel A B C D modulo
BLTCON0L register Simple test
Bob shifting test channel A and B
Simple Bitplane modulo test
Vampire V2 will show which model under ChipID
*ROM Update 20
-Latest update from diskversion
Bug removed A4000 030 hanging on startup, CD32 tests always showing on AGA
(CD32 detection causing Bus Error on an A4000)
DualPlayfield colors used screen
DualPlayfield colors for playfield2 can be shifted on AGA Amigas
Better Vampire 68080 detection
Vampire V2 detection under ChipID
Joypad testscreen for SAGA Amigas
Chipset selecting added for forcing SAGA
AutoLoading of AVTestprogram.dat file for HAM pictures, place in same directory
no need to put this file. Program load quicker without it.
INTREQ2 and INTENA2 test for SAGA for PaulaTest INTENA and INTREQ
(Vampire tests have not been tested!)
*ROM Update 19
-New Features added of latest disk version
-Bug removed A4000 030 hanging on startup (CD32 detecting causing bus exception
maybe better to update your old ROM!)
-Can now also make use of the IDE/SCSI screen
Work on guide of program
DiskdrivePortTest. You need a testplug and this feature is also locked
Real Interrupt testing index-int can also make use of the diskdrivetestplug
*ROM Update 18
-New Features added of version 4.1b
-Module play speed correction for NTSC
An upgrade for a good akiko C2Ptest, now also works on a real CD32
Loop option SerialPortTest
Overscanscreentest scale numbers, box in each corner and gray background color
ChipID number hexword readout Lisa/Denise chip
Option added for setting own ROM address and size for ROM checksumtest
Setting ROM checksum number option
HexView under ROM screen
Calculating Checksum option of Current ROM that is set
Empty Memory/ROM message when memory/rom is all empty
Setting option for two types of ROM checksum counting
CPU detection 030/040/060 added for older kickstarts
*ROM Update 17
-All except overscanscreen updated from latest disk version
-Work in progress for ROM autoconfig adding to ROM screen
Force CD32/AGA/ECS/OCS switching
Loop Function ParPortTest (use unlock mode first)
Guide bug removed for serial and parallelport help (how to built test plugs)
*ROM Update 16
-Screen for setting and readout autoconfig boards/memory zorro2 and zorro3
-Shut up option autoconfig boards and putting in address range
-Memory automatic added for memorytest after autoconfig run for zorro memory
-Autoconfig review mode to review boards that have been configured
(Autoconfig have not been tested on real hardware!)
Alot faster text pasting, extra symbols rearranged, use latest program in
combination with the new ROMs or some of the symbols will fail, if you want to
stay on the older ROM version, you can use the older VATestprogram in the
Bug text on wrong place for null modem connection removed.
Better Hex search for the hexviewer (shift s)
TestScreen for adjusting screensettings on TV/LCD/CRT screens
Begin work for an overscan screen test for adjusting screen settings TV/LCD/CRT
*ROM Update 15
-update from latest disk version
(CD32 AudioTrackplayer buggy + NVRAM test and C2P not working on a real CD32)
Toc readout button
Fastforward 10 sec and 1min buttonsm (need more work)
CD controller info readout
CDTrack numbers can be clicked to select track
CD timers (track time/time on whole CD/pos times)
CD playPos option no need of Toc with use of Pos buttons
CD Flush Button for flushing qued tasks to CD player
CD Looping of whole CD possible
*CD32 CD playing: put disc, playpos, press TOC, press play.
CD32 NVRAM readout
Hex&ASCII viewer under memoryscreen (hex search buggy)
A4000 zorro2 conflict with Akiko address? black screen bug removed
Bug fix Exception text not showing if there is an early crash program
Better key readout keyboard for filling in numbers
*ROM Update 14
-update from latest diskversion 3.6b
CD32 AudioTrackPlayer (needs more work can be buggy, insert disc first)
CD audioplayer control buttons
CD simple animation laser of position
CD toc readout
CD position nr and time
*ROM Update 13.2
-update from latest diskversion
CD32 fix for CIA TOD Timer when switching betweem PAL and NTSC
CD32 CD PIO level 2 int test
CD32 Akiko detection
CD32 Chunky to planar Test
Option added to force ECS and AGA set in config screen
Akiko Chip ID readout
*ROM Update 13
-HAM 6 and HAM 8 photo added for hi, low and CD32 ROM version
-update from latest disk version
-ROM package now also include CD32 EPROM file
DMA switching channels on and off test
Copper will skip wait instruction when blitter is busy test, COPCON
Aboutscreen will exit with a screen effect
CPU halt instruction
Swap mouse button can also be set in the config menu screen
IPL interruptlines test, you need a scope for this test and works very well.
CIA ChipSelect and ReadWrite signal pulse test, you need a scope for this.
Space on keyboard will also work for rightmousebutton
RMB will be disabled for extra functions tests when used as mainbutton.
*ROM Update 12
-update from latest diskversion
Better NTSC support.
Bug fix CPUSpeed mips numbers
Alot Faster loading program with a music module.
Bug removed possible crash with use of pre loading module of program.
Bug removed blitter & CPU speed bad correction on NTSC
Colortable shifting 256 colors test RMB
RGA test will show bits on RGA lines.
ICacheTest can also exit on rightmouse button when in use.
Better Sprite Control, will keep using state that is set
JoyDAT bits not stuck color removed
Keyboard bug removed
Serial long mode added for also testing 10bits insted of 9bits on RxD TxD.
Keyboard number filling in no need of Paula int requests any more.
* ROM Update 11
Config Screen to turn off mouse or keyboard, terminal selecting and avoid Ints.
More ID chips listing.
Many improvements for IRQ/Interrupt monitoring with trickering ints.
Bug fix Serialport test.
Keyboard can now also be used to select buttons.
Triangle audio wave added.
* ROM update 10
- NTSC/PAL Agnus/Alice detecting and booting on NTSC or PAL mode.
Realtime IRQ monitor function, will be different with IRQ only mode.
Terminal mode can now also do transmit only.
This mode also works on a PC connected to your Amiga using the testprogram in
WinUAE other Terminal mode does not work with a PC. Hold Joy UP&LEFT on boot
for slave Amiga. (ROMtestprogram needs update!)
FPU divide by zero exception test.
CHIP IDs function (not many IDs will show but vampire v4 may detect).
Parallelporttest continue after short in unlock mode.
* No ROM update
CPU Speed test with comparison, still needs more work.
BLT Speed bug fixed and larger numbers possible till 999999.
BLT Speed test will run better on CIA timer.
Program start will not turn off cache
DataCache can be switched on/off
Branchecache 060 on/off switch
Memory and address testing will auto switch off datacache
INT counting to much bug removed
IDE ints should work aldo only tested in emulation.
More readout info from drive in IDE test.
Keyboard test key readout bug fix for very fast amigas.
IDE commands added spin up, spin down and recalibrate command.
* No ROM update
IDE harddisk/cf/ssd sector register tests and readout name from device.
IDE status flags added in test
A4000 IDE interrupt added, first set it on in IDE/SCSI menu
(IDE functions have not been tested on real hardware and different drives)
Indication of higher Blit speed result possible
Genlocking each color register, need more testing.
* ROM update 9
-Will continue after awhile after flashing green for bad memory
-IDE features not working! Ignore results also for IDE interrupts.
-Updates from testprogram
Blitter Priority over CPU switch
Genlock audio switch
040/060 MMU test, needs alot more work will only test writeprotect on memory.
Potdat and potgor registers put on setpotgo screen
Locking feature changes
Trapping faults of CPU will report on an emptyscreen with exception name.
* no rom update
CIAtimers will also check as fail and oke for all modes.
CIA ports manual switching.
Paula POTport manual switching.
Bits readout will mark red when working POTDAT and JOYDAT registers.
LCD TV sharpness filter test.
RGB pattern tests rewritten for use with copperlist.
RGB pattern more colors
Distance first sector found in raw disk readout in memory. (for adjusting
diskdrive track zero sensor!)
General lock mode on dangerous features of program, read guide!
* no rom update
Screen Fetch test
Simple playfield to playfield collision test
32/64 bit sprite size
AGA Sprite Collisions tests
CIA ports info text
CIA timer help text
Gray scale added RGB pattern
Normal RGB levels Pattern added
Blitter extra large bobs, VSize and HSize test added.
Binairy readout text paula pots and joymousescreen joydat registers.
Better text interruptscreen and testtext.
Serialport test baud rates will not report fail for 3 higher speeds on port.
* ROM Update 8
-Skipping timing on screen refresh rate when not working for whole program.
-Updates From testprogram version 2.7b and 2.8b.
Dual Playfield Test 6 and 8 bitplanes
SpritePlayfield Priority Adjustment
Better RGA Test
Paula POTRegisters Realtime Readout
* No ROM update
31khz screen test
Picture of Serial and Parallelport with markings where problem is.
AGA Video pattern color bars test have numbering text.
Lower CPUs will leave out options in CPU menu.
* ROM update 7
-Updates from 2.6b Testprogram
-Fault Color code added overlay fault
ROM file in package also for single ROM socket Amigas
ROM files also work now with 68000 and 68010 CPU`s
Mouse button lockup bug fix terminal mode
Auto slave connection on mainmenu
RGA pulse test (experimental for scope)
Some functions don`t need CPU interrupts any more (keyboard)
Mouse click menu after first boot will make the program work on copperlist fix
Slower serial output for terminal mode so more Amigas will work with it
Realinterrupt testing can also do tests on IRQ bits without use of ints to CPU.
Different speed testing showing with baud text on serialport test
A higher speed added serial test
Playmark buttons added audio test
Delay options for delay between setting and testing on serialport signals, not
for TxD and RxD, if you set it to fast you may find a slow logic port by
getting bad result on the serial test, dont turn on icache.
CIA chip nr help text
Real time CIA input output port listing
About screen text fix terminal mode
* ROM Update 6
-Updates from 2.5b testprogram
-Serial port test 68000? version can give a TSRE bug!
Many work on terminal mode and is now fully working
New tests for blitter filling mode
Linedraw test doing two modes
UART removed from diskdrive menu
Realinterrupt setting diskdrive that is used for interrupts.
AllCombination logic bob test improved
CIAB TOD timer better oke check
* ROM Update 5
-Terminal mode (use a null modem cable)
-Updates from 2.4b testprogram
Sprite tests bug fixing/improvement
Prefixed Address tests chip location text
Improvements for second joyport control of mouse
Better use of Rightmouse button used when left is stuck or hold on startup
Terminal mode, you can now control one amiga with another one through
a simple null modem cable, (buggy, still needs work and is not finished).
Blitter zero test (collision)
Audio modulate test done with modulate function of Paula.
Audio square wave fixed
Don`t use Amitestkit test plugs warning message added
* No ROMUpdate
Addresstest can do 8bits 16bits and 32bits on the databus
Prefixed address tests (A500 trapdoor/A3000 zipram etc).
AddressPush, needed to test longer range for 24bit fastmem
AddressBlock option so you can do more then one ram simms in one go.
AddressPulse mode can also do 8/16/32bits
Address auto skip on lower addresslines when in 16/32bits on the databus
Manual address testing
Sprite reusing test
Keyboard stuck on A1200 with accelerator bug fixed
* ROM Update 4 (don`t use older versions of the ROM!)
-Diskdrive Stepping down bug removed on each reset and power turn on for CIA
8520PL chip. Not tested on all CIA chips! The diskdrive should not make any
stepping noise on turn on.
-Pre put stepping up at restart, this is mostly better then stepping down.
-Update for new functions from 2.2b testprogram.
RTC hold mode test
RTC smarter writing away settings time and date
Modules added to package. (mod by Aquafresh of Mellow)
Diskdrive interrupts will always be tested
Better sprite tests and sprites
AGA Sprite colortable alternate test
Keyboard screen can show keyboard buffer
Overlay test better response on left mouse button
Text for hanging mousebuttons and fire1 button 2e port on startup
Better support for using mouse on 2e port after fire from 2e port.
If fire on port 2 or port 1 is stuck it will use the right button port1.
Module player fix, still not perfect.
Addresspulse fix for 68000, test needs more work!
* ROM Update 3
-Added tests from latest version
-Keyboard interrupt stuck fix
-ICache and Dcache test working
-Better memory detection (for A4000 users) with mainboardmemory
Copper blitter control enable test
256 color Hires screen test, can be used for 32bits fetch test to lisa
Sprite tests will enable sprites right away
Sprite Attach mode
Interrupt blocking test INTENA register
Interrupt blocking SR test
Address Pulse mode, can be used for scoping address and data lines
Audio main volume buttons
RTC button to Quickly set the date
* ROM update 2
-Added extra tests from latest version
-Memory detection, maybe buggy with A4000 memory on mainboard below 16mb.
-Sprite bug removed
-CPU detection added
-24bit address mode detection on memory
-Blitter readystuck bit removed
Program ported to ROM files for A1200
Boot code ROM
Color codes ROM
Fixes for Program in ROM
Paula Bug fixed 4th channel, some Paula chips did not load sample on first go.
Crash bug in Program removed after Gayle test had run.
MousePointer Sprite bug fixed
RTC Time of Day timer good syncing and full time
NTSC/PAL switch (other tests will be affected)
NTSC sprite height fix
RTC setting date working both RTC chips
Fast mode for both RTC chips, extra fast modes for RP5C01 RTC
AM/24H TOD reseting when above 12 o clock midnight
MemoryTest Bad data lines results inverted bug fixed
Both 16bits and 32bits data results memorytest when failed
No lock on ROM address memtest readonly test
Sprites moving test up/down left/right
Misalignment message memorytest for 32bits databus.
Main ROM Version digid text
More digid for TOD sync
Better RTC detecting
RTC setting date oke, year digid not set oke M6242B RTC
RTC M6242B week setting
RTC M6242B 10 year digid fix readout
RTC 24/AM PM mode. no adjustment of clock yet
CPU icache turn on/off button
040 id fixed
NTSC/PAL VBL count auto adjust CIA tests
NTSC/PAL switch for counting used CIA tests
ROM startaddress text, memory test fixed
Module playing audio noise fix
MMU off button
Bug fixing and making program smaller
Horrible audio noise removed when switching on and off channels
Color registers test for none AGA made faster
Lots of screen glitching removed
Memory Test can detect all memory
MemoryTest can test all memory automaticly also in a loop
MemoryTest size quick button for setting memory size manual in a quicker way
Polygon test faster and double bufferd
Polygon test will draw more diffrent polygons
Bobs test have random bob on startup.
CIA show counting on PAL Amiga for 68000 now fast enough
RTC M64242B not done yet will give abit garbage
060FPU crashing removed on FPU test
Program smaller then previouse version
Update log 1.5b
RTC alot of changes for testing. Not 100% done, older RTC still needs work
take in account control of RTC is pretty direct.
TOD timer counter added to check if RTC is running about the right speed
RTC Clock Setting
RTC Small protection for wrong input
RTC AM/PM 24H mode. Program will not adjust RTC hour registers!
Small slow down between serial/parallel port switching and reading results.
Fix for A1200 users with slower logicport chip U29/U28.
Gayle int hanging fixed
Extra mode added for interrupt testing. You can now shutdown interrupts on
first activation, it will avoid hanging of interrupts.
Crash caushed by using frequency buttons fixed
Improved ICache Tesing, program will reroute with a faulty instruction and
instructions have to be more accurate or else it will fail the test.
MMU Turnoff button
Data Cache Test
Parallelport pulse mode will pulse on SEL POUT BUSY. Use RMB.
Diskdrive CIA waiting improved
Update log 1.4b
Guide for all the functions of the program
ROM checksum test looping till mouse is pressed
Extended ROM test with checksum
Read only mode memorytest
Loop function memorytesting
All colors registers test
Audio one button for frequencies
Audio fast switch buttons turning on and off channels, left right etc.
RTC can readout two types of RTC chips
RTC write test of days
ICache memory test, is still in work.
Memorytest bug removed no reseting error counting.
MemoryDetecting, not finished yet
Slowmem removed from menu for AGA amiga`s
Better pattern Superhires screen
Update log 1.3b
ICache on Button gives reponse
Rev and ID number for 060 CPU
SerialPort pulse test signal activity on screen
Level 7 counting
option removed for now Invert CIAB button
Update log 1.2b
Better warning message parallelport
Bob testing will test all possible logic combinations of blitter
Bob stress testing
RTC begin work not complete, don`t use!
Color fixing for sprites
CPU cache turn on button
FPU060 test partial fix, need 68060 library running!
060/040 address exception test added