Short: OFS/FFS and SFS handlers with TRIM Author: Ilkka Lehtoranta Uploader: ilkleht gmail com (Ilkka Lehtoranta) Type: disk/misc Version: 1.0 Requires: AmigaOS 2.04 or newer (dos.library V37) Architecture: m68k-amigaos >= 2.0.4 CopperFS provides new replacement Amiga OFS/FFS and SFS filesystem implementations with TRIM support. They are written in C# using GPT 6.1 Sol and 6.0 Astra. The project is MIT licensed. CopperFFS supports reading and writing DOS0/OFS and DOS1/FFS volumes. CopperSFS supports SFS and SFS2 volumes. The SFS2 TRST handler also supports SFS volumes and can recover outstanding CSUN and TRST journals on writable media. CopperTrim provides an explicit manual discard command for supported writable formats and devices. Discard requires a device and driver that support the required SCSI UNMAP commands. The archive binaries passed mount, write, Flush, manual TRIM and cold remount tests under emulated Kickstart 2.04 and 3.1. CopperSFS recovered both TRST and CSUN journals on both ROMs. Physical Amiga and storage testing remains open. Archive contents ---------------- CopperFFS OFS and FFS handler CopperSFS SFS and SFS2 handler with TRST as its default CopperTrim Manual TRIM command CopperFS.readme This README LICENSE.txt MIT license THIRD-PARTY-NOTICES.txt CopperSharp license Installation ------------ Make a verified backup before changing a partition's filesystem handler. Complete journal recovery before switching SFS handlers. Copy handlers to L: on your boot volume. Use CopperFFS for an OFS or FFS partition, or CopperSFS SFS2 TRST for an SFS or SFS2 partition. Copy CopperTrim to C: if you want to use it. However, it is only useful if your underlying device driver supports it. For a partition configured in the RDB, update the filesystem entry with the selected handler and assign it to the partition's existing DOS type. Copying a handler to L: alone does not update an RDB filesystem entry. For a mountlist or DOSDrivers entry, set its FileSystem field to the handler in L: and retain the partition's existing device, geometry and DOS type. Check that the volume mounts and that its files are readable before relying on it. After an interrupted SFS write, use the appropriate handler to complete recovery on writable media before switching handlers. The SFS2 TRST handler can recover both CSUN and TRST journals. Source code is at https://github.com/ilehtoranta/CopperFS